Results 1 to 10 of 26

Thread: GPU Fried!?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. Default GPU Fried!?

    So my computer has been crashing when running ns2 or cs:s preventing me from doing some work in the zm server.

    So I run furmark to check and it instantly crashes. When the system reboots the alarm for failed GPU goes off in the cmos until I recycle the power again. Luckily, I can use it normally but it appears not to work for gaming...

    Going to run some more tests, I do not understand how this thing could go bad already as it has never even gotten over 50C even once! All my ram is good as verified by mem86+

    ---------- Post added at 05:35 PM ---------- Previous post was at 05:25 PM ----------

    Could be my psu as I am getting <11.3V on the 12V rail. This might also explain all of my computer problems recently! The psu has a 7 year warranty so I should be good for a replacement.



  2. Default

    Yep, PSU warranty time.



  3. Default

    yes 11.3 is out of spec.


    Quote Originally Posted by Zero
    So... what your trying to tell me is that you saw a spherical square?

  4. Default

    Now when I test the psu under no load it reports fine but with the 3.3V out of spec reporting over voltage. (with the psu disconnected and hooked up to a psu tester that is.



  5. Default

    Got up to 160W load on it and still can not get the voltage to read out of spec. Perhaps there was a short or something that was corrected by swapping out the psu's...



  6. Default

    What PSU is it?


    Quote Originally Posted by Zero
    So... what your trying to tell me is that you saw a spherical square?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •