Quote Originally Posted by Nemesis View Post
i use an A-5, so it's impossible to jam or outshoot. what do you mean the feed neck is stuck, i don't think i'm understanding this right, do you mean from inside your e-hopper? or inside the marker itself?
Inside the marker itself, I took it apart several times to get a feel for the inner workings, put it back together fine. I took it apart a few weeks ago and put the ball stopper in backwards, and because of this the gun would not work correctly. So I once again took it apart, fixed the ball stopper, and now the gun shoots just fine.

NOW, what I'm talking about is where the feed neck for the gun attaches. Inside there is a piece of metal that acts as a spring, so you can use the lever to attach and detach the feed neck. If that little piece of metal gets bent or moves or ANYTHING while you're putting the other side of the gun back on it will fuck up and not work.

By not work I mean one of these two things.

1. The piece of metal gets jammed between the lever, and both sides of the frame, and the feed neck will stay STUCK forever unless you take the gun apart, this is the better of the two.

2. The piece of metal breaks loose and sits inside the frame jammed against the lever and when you try to attach the feed neck it's just too loose. This sucks because now I HAVE to take it apart in order to attach a hopper.

This little piece of bent metal has about less than a millimeter of space to stay put, and any movement makes it pop out. makes me rage hard, considering super gluing the lower half of it so it won't move, but the top will still work. If all else fails, the feed neck will have to be perma installed.

Holy fuck that's a wall of text.