repairing fiberglass?

[Perry]

some asshole rand me off the road today and had a curb take out one my side skirts. I would buy another one if I could but these arent made anymore. Is there anyway to repair it? The tabs where it was bolted onto are broken off, and part of the opening where the exhaust comes out of ripped off too. am i screwed?

[XxMastagunzxX]

You can get a fiberglass repair kit at say...advanced auto parts...comes with 2 chemicals and you mix them and then paint it on to the pieces...make SURE you wear a mask...then sand it down and paint over it...works good.

[Perry]

thanks masta.

[HfG≈๖ۣۜÇĄŖŅĄĢĘ]

You can get a fiberglass repair kit at say...advanced auto parts...comes with 2 chemicals and you mix them and then paint it on to the pieces...make SURE you wear a mask...then sand it down and paint over it...works good.

Pretty much took the word right outta my mouth. Also at far as the broken tabs go, That just might be a bitch.

[XxMastagunzxX]

Make sure you wear the mask...especially when sanding it down...sand it outside

[taz1stP]

wear gloves that are think and ones that you don't want to use and you mix the cems and put the peace of fiberglass in it then on what you want to fix. make sure you let sit for about 24 hours before you do anything. what ever you do make sure totally dry before you sand or you will have to sand all off and start over. i wouldn't worry about wearing a mask ant mush stronger then paint no where close to what a paint booth that has lacquer thinner and paint cans open in so i wouldn't worry about the mask.

[chase]

wear gloves that are think and ones that you don't want to use and you mix the cems and put the peace of fiberglass in it then on what you want to fix. make sure you let sit for about 24 hours before you do anything. what ever you do make sure totally dry before you sand or you will have to sand all off and start over. i wouldn't worry about wearing a mask ant mush stronger then paint no where close to what a paint booth that has lacquer thinner and paint cans open in so i wouldn't worry about the mask.

Shut the fuck up please and thank you.

[StarsMine]

wear gloves that are think and ones that you don't want to use and you mix the cems and put the peace of fiberglass in it then on what you want to fix. make sure you let sit for about 24 hours before you do anything. what ever you do make sure totally dry before you sand or you will have to sand all off and start over. i wouldn't worry about wearing a mask ant mush stronger then paint no where close to what a paint booth that has lacquer thinner and paint cans open in so i wouldn't worry about the mask.

Breathing in shards of glass isn't much worse then paint? wtf!?