Extended Delays

[ZERO]

Yes as I thought my board has raid 5:

Dual RAID

The Intel ICH10R chipsets incorporate Six Serial ATA connectors with high performance RAID functions in RAID 0, 1, 10 and 5. The JMicron controller provides another two Serial ATA connectors for RAID 0, 1, and JBOD functions. This motherboard is the ideal solution to enhance hard disk performance and data back up protection without the cost of add-on cards.

Unfortunately I have 4 HDDs plugged into those 6 ports...

I could temp disconnect 2 of them and figure something out. Maybe wire the esata ports internally lol.

[ZERO]

Raid 5 but no support for drives over 2TB shit never a cheep solution

---------- Post added at 05:28 PM ---------- Previous post was at 05:18 PM ----------

OK the alternative is $960 to get a 4 port raid card and add it to my system with 4x 2tb drives in raid 5 then copy the data to those then reformat in ReSF then copy back then b/c I used the same brand raid card and same size drives I can then destroy the raid 5 array and add those 4 drives to my existing raid 6 by using both cards for 1 massive array with double the capacity I have now.

Regardless still need donations to do any of these options.