That is nuts. At what point do you just decide that case is bad luck and start from new?
Some bad jew jew you have going on there...
That is nuts. At what point do you just decide that case is bad luck and start from new?
Some bad jew jew you have going on there...
I remember when the money was raised to build said system. Good times. * Tear rolls down face.* Option B definitely.
Make all your last demands for I will forsake you and I'll meet your eyes for the very first time, for the very last.
maynard <ibis>: they are awkward and last 2 damn long. I prefer thinner smaller ones
Zero ?
is donating through paypal for admin (pre-paying for a long time) acceptable to fund you fast?![]()
Yea that is fine too, how ever you all want to offer support I am more than happy to accept it. Remember if you open mutiple subs on the same account they stack.
So for example lets say I want to all at once add 5 months to 1 account. I would create 5 subs for that account and then cancel them. So I have paid for admin 5 times and the system counts 1 month each time it gets a payment so you know have 5 months of admin prepaid for example. Works for gifts ect.
I have found that there is an option C although it is risky in the event a 4tb drive fails. The real problem with option C is that it involves installing Windows 8...
amagami_10_02.jpg
As I said before the root of the problem is with NTSF and therefore if I replaced NTSF with ReFS my problems would be solved. There is a way to run ReSF in windows 8 using this mod: http://forums.mydigitallife.info/thr...lient-Download
So I could downgrade to windows 8 and then install that mod to get ReFS and then copy everything off my array to either a second temp array or something and then copy it back after reformatting in ReFS. The total cost would be much lower than having a second computer.
I have an old PCI raid card that supports raid 5. I could use that in a computer even though it is only SATA1 and in theory have a safe array to use.
Possible costs for this would be: $604-$770 assuming that my old raid card works (and I can find a computer with a pci slot) (it may b possible to make a raid 5 on this motherboard too)
Yes as I thought my board has raid 5:
Unfortunately I have 4 HDDs plugged into those 6 ports...Dual RAID
The Intel ICH10R chipsets incorporate Six Serial ATA connectors with high performance RAID functions in RAID 0, 1, 10 and 5. The JMicron controller provides another two Serial ATA connectors for RAID 0, 1, and JBOD functions. This motherboard is the ideal solution to enhance hard disk performance and data back up protection without the cost of add-on cards.
I could temp disconnect 2 of them and figure something out. Maybe wire the esata ports internally lol.
Raid 5 but no support for drives over 2TBshit never a cheep solution
---------- Post added at 05:28 PM ---------- Previous post was at 05:18 PM ----------
OK the alternative is $960 to get a 4 port raid card and add it to my system with 4x 2tb drives in raid 5 then copy the data to those then reformat in ReSF then copy back then b/c I used the same brand raid card and same size drives I can then destroy the raid 5 array and add those 4 drives to my existing raid 6 by using both cards for 1 massive array with double the capacity I have now.
Regardless still need donations to do any of these options.
This same system is over 4 years old. Most people would have had 2-3 computers during this time. Rather than spent $2000 every two years I find it better to just invest in a $4000 system that lasts at least 6 years. Honestly this cpu should still hold good for me at least another 3 years so that is good. The parts that get invested in over time can be moved over to a new system. Ironically most of the cost in this computer is now in the storage system.